EN
11
It means the total
records is 5, the
current No. is No. 1.
The corresponding
time is 8:16.
The corresponding
date is May 14 .
th
The most recent record )1( is shown first. Each new measurement
is assigned to the first )1( record. All other records are pushed back
one digit )e.g., 2 becomes 3, and so on(, and the last record )60(
dropped from the list.
CAUTION
4.2 DELETE THE RECORDS
If you did not get the correct measurement, you can delete all results by
followings steps below.
1. Hold pressing “MEM” button for 3 seconds when the monitor is
in the memory recall mode, the “dEL All” will ash on the display
(pic. 7.A).
2. Press “MEM” to conrm deleting , the LCD displays “ dEL donE”
and the monitor will turn o (pic. 7.B).
Note: To exit out of delete mode without deleting any records, press START/
STOP button before pressing “MEM” to conrm any delete commands.
3. If there is no record, the right display will show (pic. 7.C).
5. INFORMATION FOR USER
5.1 MAINTENANCE
To obtain the best performance, please follow the instructions below.
• Put in a dry place and avoid the sunshine
• Avoid immersing it in the water. Clean it with a dry cloth in case.
• Avoid shaking and collision.
• Avoid dusty environment and unstable temperature surrounding.
• Use the slightly damp cloth to remove the dirt.
• Avoid washing the cu.
next record,and so on. During the process of displaying the results,
if there is no operation, the blood pressure monitor will turn o
in one minute. Or you can press “START/STOP” button to turn it
o. (pic. 6.B).
To Next Page
Loading...
Need help?
General
