11
10
BEFORE YOU START
BEFORE YOU START
Setting Date, Time and Measurement Unit
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that
is stored in the memory. (The setting range of the year :2018—2058
time format:24H)
1.When the monitor is off,
hold pressing “SET” button
for 3 seconds to enter the
mode for year setting.
2.Press the “MEM” button to
change the [YEAR]. Each
press will increase the
numeral by one in a
cycling manner.
3.When you get the right
year, press “SET” button
to confirm then it will turn to
next step.
4.Repeat step 2 and 3 to set the [MONTH] and [DAY].
.Repeat step 2 and 3 to set the [HOUR] and [MINUTE]. 5
6.Repeat step 2 and 3 to set the [UNIT].
To Next Page
Loading...
Need help?
General
