ENGLISH
30
www.trapp.com.br
Shredder Assembly
Some shredder items are provided unassembled, in order to assemble them, follow the instructions
according to Figures 2 and 3:
Material feeder
In order to assemble the green crop feeder, you must tilt the feeder in order to t it in the machine support, as shown
in Figure 2.
Image merely illustrative
Machine
support
Feeder
lowered to
operating
position
Figure 2
Assembly of the Material Outlet Spout
In order to assemble the material outlet spout,
follow the directions:
The gures show how the ration outlet device shall
be assembled to the machine.
Observe the assembly sequence of the holders: a
washer (A) is placed over the fastening plate (B) and
is fastened with nut (C), according to Figure 3.
To Next Page
Loading...
