EasyManua.ls Logo

Travis Industries Tempest Torch - Placement Requirements; Location Restrictions; Clearance Specifications

Travis Industries Tempest Torch
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation (for qualified installers only) 7
© Travis Industries, Inc. 4050608 100-01203_000
Placement Requirements
! For Outdoor Use Only. Install in well-ventilated areas.
Do Not Locate the Torch:
In high traffic areas.
Under or near trees, plants and buildings where debris may constantly fall into the torch.
Excessive debris will require high maintenance and/or cause malfunctioning of the torch.
In places where people, children, and pets may contact the torch. Guards or fences
around the torch in these locations are recommended.
In places where the controls beneath the torch may be submerged under water.
Submerging of any part of its controls will require complete replacement of the controls.
Clearances:
The distance from ground level to the base of the burner shall be a minimum of 7 ft. (2.1M)
where installed within 2 feet (0.6M) of public walkways (e.g.: sidewalk, shared walkway
between two homes, or pathway in commercial applications). Lesser clearances shall be
permitted to be used only where acceptable to the authority having jurisdiction.
Keep combustibles away from the shaded heat zone of the torch (see illustration below).

Other manuals for Travis Industries Tempest Torch