EN-45
| evation
2. Swing the upper end of the drivepack into the down tube of the e-bike.
When you have inserted the drivepack correctly and completely
into the down tube, the locking mechanism built into the down tube
automatically engages in the motor mount and locks the drivepack in
the correct position (you hear a click).
The push button or locking lever also moves automatically into the
closed position.
3. Check the drivepack makes a tight fit.
If the drivepack does not lock, pull it out again if necessary and then try
to insert it again. Do not use the drive system if the drive unit cannot be
locked. In this case, contact an authorized specialist to have the fault
rectified.
FAZUA Original_Instrucion_US-EN.indb 45FAZUA Original_Instrucion_US-EN.indb 45 28-Feb-20 13:08:3428-Feb-20 13:08:34
To Next Page
Loading...
