EN-47
| evation
1 5.3 Secure/lock drivepack from e-bike
Depending on the bicycle manufacturer, a cylinder lock is integrated into
the frame of your e-bike, which you can use to lock the drivepack mounted
on the e-bike and thus secure it against theft etc.
1. If necessary, make sure that the drivepack is correctly attached to the
e-bike.
2. Insert the key into the cylinder lock,
if necessary.
3. Turn the key 90° counterclockwise to
lock the drivepack to the e-bike.
4. Remove the key from the cylinder lock.
If you want to unlock the drivepack again:
1. Insert the key into the cylinder lock.
2. Turn the key 90° clockwise to unlock
the drivepack on the e-bike.
FAZUA Original_Instrucion_US-EN.indb 47FAZUA Original_Instrucion_US-EN.indb 47 28-Feb-20 13:08:3628-Feb-20 13:08:36