EN-26
evation |
4.3 Instructions for riding with the drive system
Observe the following instructions for riding your e-bike equipped with the
evation drive system.
Gear change:
The gearshift of your e-bike can be operated in the same way as that of a
conventional bicycle. Selecting a suitable gear increases the speed, power
and range of your e-bike while maintaining pedal frequency.
Irrespective of the type of gearshift mounted, the following applies:
► Stop pedaling when you change gears. This relieves the load on the
rear derailleur and the drive of your e-bike.
Range/trip planning:
How long or how far you can ride your e-bike before you need to recharge
the battery depends on several factors.
These factors include, but are not limited to:
• the set support level;
• the (riding) speed with which you move;
• your gear changing;
• the type of tire and the tire pressure set;
• the chosen route and weather conditions;
• the weight of driver and e-bike (total weight);
• the condition and age of the battery
The following therefore applies as a matter of principle:
► Familiarize yourself with your e-bike step by step and away from roads
and heavy traffic.
► Test the maximum range of your e-bike under various external
conditions before planning longer trips. An exact statement about the
range of your system is neither possible before nor during a trip.
Storage and operating temperatures
► Observe the operating and storage temperatures for the components
of the drive system and for the components of your e-bike - especially
for the battery, as it can be damaged by extreme temperatures.
DANGER
If you do not handle the battery properly, the battery may explode!
FAZUA Original_Instrucion_US-EN.indb 26FAZUA Original_Instrucion_US-EN.indb 26 28-Feb-20 13:08:2828-Feb-20 13:08:28
To Next Page
Loading...
