Trek Fetch+ 4 - Walk Assist and Lights

2-7
Safety Quick start Riding Maintenance Resources
Walk assistance
Walk assistance provides a little push for those times when you are walking or pushing
your bike. Shifting your bike into a higher gear increases the speed of walk assistance, up
to approximately 4pmh/ 6kph.
WARNING: Walk assistance should only be used when you are walking your bike. Never
use walk assistance when you are riding your bike, or in situations where the wheels are not
touching the ground.
Press and hold the button.
While holding the button, walk the bike forward or backward
to activate walk assistance.
Lights
For safety, the lights will always turn ON when the bike is
ON. The light button will not turn the lights ON or OFF.