4-8
Resources Maintenance Riding Quick start Safety
Fenders
(on front cargo – sold separately on rear cargo)
If you are re-installing a fender, you must coat the top mounting bolt threads with new
Loctite Blue 242 adhesive (or similar) with each installation.
WARNINGS: Failure to follow these warnings could result in serious injury or death.
• Fender mounting bolts may become loose. To avoid loose bolts, coat the bolt threads
with fresh threadlocker adhesive with each installation. Failure to use an adhesive on the
bolts may result in a loose or detached fender contacting the tire causing an abrupt stop.
• When re-installing a fender, make sure you use the bolt(s) and all washers supplied with
the bicycle or fender assembly. These bolts and washers have specic sizes and locking
capabilities. Failure to properly install these bolts and washers may result in a loose or
detached fender contacting the tire causing an abrupt stop.
To Next Page
Loading...
