Trek Fetch+ 4 - Lighting and Local Laws

3-11
Safety Quick start Riding Maintenance Resources
Pre-ride checklist
□ Check your suspension (if applicable)
• Adjust your suspension for your use,
and make sure that no suspension
component can “bottom out” or be fully
compressed. Suspension adjustment
instructions (pre-load adjustment) are
available in the Support section of
trekbikes.com.
□ Check your pedals
• Make sure your pedals and shoes are
clean and free of debris that could
affect your grip or interfere with the
pedal system.
• Grab your pedals and crank arm and
wiggle to see if there’s any looseness.
Also spin the pedals to make sure they
rotate freely.
□ Check the surface temperature of seats
• Before placing cargo or passengers
on seats, check the surface to avoid
extreme temperatures.
Lighting
Your e-cargo lighting system consists
of a front light and rear light. The lights
improve visibility of the road and surround-
ings to the rider and improves your visibil-
ity to other people. The lights are powered
by the Bosch e-bike battery.
So you don’t get stuck out in the dark, the
equipped lights will continue to light your
way for two hours after the battery can no
longer provide pedaling assistance.
Know the local laws
Many locations require that lights are
used in conditions of reduced visibility.
Additionally, some locations have specic
requirements regarding the lights used on
your bike while riding on the road. Make
sure you understand lighting requirements
in your location before you ride, and
consult your local authorities if you have
questions.
NOTE: Without the Bosch battery mounted
on the bike, the e-cargo lighting system
does not work.