Trek Fetch+ 4 - Page 74

4-16
Resources Maintenance Riding Quick start Safety
Replace
1. Examine the tire, rim tape, and the rim for defects, dirt, or debris.
2. Inate the inner tube just enough for it to take shape.
3. Place the inner tube in the tire so that it is inside the tire all the way around. Insert
the valve stem through the hole in the rim.
4. With your hands only, push one side of the tire over the rim. Make sure the tube is
now inside the rim and reinstall the valve nut.
5. Push the other side of the tire over the rim. Do not use a tire lever or sharp object.
It could pierce the tire. Check both sides of the tire to make sure the inner tube is
completely inside the tire.
6. Inate the tire to the pressure indicated on the side of the tire. Do not over-inate.
7. Check to make sure the tire bead is set on the rim.