TrekStor SURFBOOK E11B - Accessing the Settings; Connecting the Surfbook to the Internet; Connecting to a Stationary Wireless Network (Wifi)

23
16. Accessing the settings
The button for accessing Settings (a cogwheel symbol) can be found in
the bottom-left corner of the Start menu.
Alternatively, you can access the settings by opening the Info Center and clicking
"All settings".
You can also access Settings by using the cogwheel symbol on the keyboard.
17. Connecting the Surfbook to the Internet
Connecting to a stationary wireless network (WiFi)
a) Call up the settings (see Section 16).
b) In Settings, tap "Network & Internet".
c) Click "Wi-Fi" on the left in the next screen.
d) Click the slider or the word "Off". The word "ON" now appears next to the
slider.
e) The Surbook searches for all available wireless networks nearby and then
displays them as a list "Show Available Networks".
f) Click the network that you wish to connect to.
i
ADVICE
If you do not want the Surfbook to automatically connect to the selected
network if available, remove the tick next to "Connect automatically".
g) Click "Connect". The Surbook connects to the selected network.
Depending on how your router is conigured, you will be prompted to
authenticate yourself to the network. Generally speaking, a wireless network is
secured through a WPA network key or a WPS authentication method:
WPA
If a WPA network key was assigned for your router, enter it in the input ield and
click "Next" to conirm.
WPS
If a WPS authentication method (for example, a PIN) was set up for your router,
the Surbook shows a different input ield. Enter the PIN in the input ield (or
follow the selected authentication method). The Surbook now connects to the
wireless network.