TrekStor SURFBOOK E11B - Reset; Switching Off;Restarting the Surfbook; Useful Tips on Saving Energy

30
24. Reset
If the Surbook "freezes" and no longer responds, you can reset it. Press and
hold down the on/off switch for at least 10 seconds until the device switches
off. Wait for about 20 seconds and then turn the device on normally.
i
ADVICE
Any files that have not been saved will be lost when the Surfbook is reset.
25. Switching off/Restarting the Surfbook
Briely press the on/off switch on the device to activate the standby mode.
Press it again quickly to take the Surbook out of standby mode.
Proceed as follows to restart the Surfbook:
a) Open the Start menu by clicking the Windows icon on the bottom left of
the display or by pressing the Windows key on the keyboard.
b) Click " " in the bottom area of the Start menu and then click "Restart".
The Surbook shuts down and restarts.
Proceed as follows to shut down and completely switch off the Surfbook:
a) Open the Start menu by clicking the Windows icon on the bottom left of
the display or by pressing the Windows key on the keyboard.
b) Click " " in the bottom area of the Start menu and then tap "Shut down".
The Surbook shuts down.
26. Useful tips on saving energy
■
Deactivate the WiFi function when it is not in use.
■
Only leave the Surbook connected to the socket until the battery is fully
charged. Always unplug the power adapter from the Surbook if you do
not load the Surbook.
■
Reduce the display brightness in the settings under "S" → "D".
■
Switch to standby mode when the Surbook is not in use or switch it off
completely.