AIR/PRO - USA
-3-
Battery
Type: Ni-MH
Voltage 3 Cell, nominal 3.6V
Capacity 3.5Ah
Life 8 hours (fully charged
battery pack fitted)
Charging
method/rate Mains Charger
14 hours from fully
discharged.
Weight 0.42 lbs
Charger
Mains voltage: 120V
Consumption 4W nominal
No load output 12VDC
Nominal output 4.2V 300mA
IP20 Indoor use only
EN 60335-1, 60335-2-29
Weight 0.44 lbs
Voltage 12V
Head size 20
1
/
2
” to 24
1
/
2
”
Protection factor Assigned (APF) 20
Motor sound level 70db
Weight: 2.21 lbs nominal
Temperature
range: Charging +41°F to +104°F
Use -23°F to +104°F
Storage +41°F to +104°F
Airflow: Initial 7.06 cf/min
(clean filter, fully charged
battery)
Minimum 5.6 cf/min
Humidity 0-90% storage and use
(Store out of direct sunlight)
Pressure Storage 80Kpa to 130Kpa
Use 80Kpa to 130Kpa
APPROVALS
The Trend Airshield Pro has been tested to ANSI
Z87.1 by ICS Laboratories, 1072 Industrial
Parkway, Brunswich, Ohio 44212.
The visor, when fitted to the unit gives protection
as detailed below:-
ANSI Z87+ HIGH IMPACT
Note that contact of the visor with your skin
will not cause allergic reactions under normal
conditions. It is unlikely that any contact will occur
in normal conditions of use.
The frame is marked:-
Trend Routing Technology
Airshield
ANSI Z87+ HIGH IMPACT
Size range 6 - 3/8” - 7-3/4”
Year of manufacture
Respiratory Protection (Reference Only):
BS EN 12941:1999, respiratory devices, powered
filtering devices class TH2P. For use against solid
particulates only.
Eye Protection:
ANSI Z87+ HIGH IMPACT.
TECHNICAL DATA
Type: Powered AIR/PRO.
This unit does not carry any respiratory
approvals in North America. Record keeping
should be in accordance with OSHA.
To Next Page
Loading...
