TREND CRT/MK3 - Page 10

-8-
CRT/MK3
Leg Assembly
(underside view)
Use Phillips
®
No.2
screwdriver.
Bench Top
Assembly
(underside view)
x16
x16
x8
x4
NOTICE: It is advisable
to tighten leg assembly
machine screws after leg
assembly is fitted to the
underside of the table top.
-8-
CRT/MK3CRT/MK3
Leg Assembly
(underside view)
Use Phillips
®
No.2
screwdriver.
Bench Top
Assembly
(underside view)
x16
x16
x8
x4
NOTICE: It is advisable
to tighten leg assembly
machine screws after leg
assembly is fitted to the
underside of the table top.