To Next PageTo Next Page
Need help?Do you have a question about the TREND CRT/MK3 and is the answer not in the manual?
Explains the severity levels of WARNING, CAUTION, and NOTICE symbols.
Details symbols related to PPE and referring to the manual for safety.
Covers essential safety practices for using power tools.
Outlines safety rules specific to routing operations.
Guidelines for handling and using router cutters safely.
Safety advice for operating routers in a fixed position.
Instructions for replacing the mains plug and fuses for UK/Ireland.
Recommendations for using extension cables, including conductor size and rating.
States the product's compliance with relevant EU directives.
Identifies potential residual risks and the need for hearing protection.
Guides on assembling the table and leg frame, and lists required tools.
Lists compatible routers and instructions for mounting to the insert plate.
How to mount the table and install the no-volt release switch.
Procedures for fitting insert rings, back fence, and guards.
How to attach the mitre fence and install the pushstick park.
Connecting the dust extraction hose and accessory.
How to safely turn the router table on and off using the switch.
Adjusting fence and safe pushstick operation.
Steps for moulding and correct workpiece feeding direction.
Instructions for stopped moulding, mitre fence, and lead-on pin use.
How to set up the fence for edge planing.
Details on the CRT/4 hose and connector for dust extraction.
General| Brand | TREND |
|---|---|
| Model | CRT/MK3 |
| Category | Tool Storage |
| Language | English |
