-5-
ITEMS ENCLOSED
1 x Parallel side-fence
2 x Side-fence rods
2 x Grip knobs
1 x Collet 6mm
1 x Collet 6.35mm (
1
/4”) fitted to machine
1 x Collet 8mm
1 x Guide bush 16mm and screws
1 x Spanner (17mm A/F) for collet nut
1 x Spanner (15mm A/F) for spindle
1 x Hex key (4mm A/F) for side-fence
1 x Dust extractor spout
1 x Instructions
1 x Guarantee card
T3
MANUFACTURERS
DECLARATION
We declare under our sole responsibility that
this product is in conformity with the
following standards of standardised
documents:
EN 50144.1, EN 50144.2.17, EN 55014.1,
EN 55014.2, EN 61000.3.2, EN 61000.3.3 in
accordance with the directive 98/37/EC and
following modifications 73/23/EEC,
93/68/EEC, 89/336/EEC.
Level of sound pressure according to
86/188/EEC & 98/37/EC, measured
according to EN 50144:
Lpa (sound pressure) 81.3 dB(A)1
Lwa (acoustic power) 94.3 dB(A)2
INFORMATION ON
NOISE/VIBRATION
The noise level when working
can exceed 85 dB(A).
Wear ear protection!
Weighted root mean square
acceleration value according to EN 50144:
>4.0 m/s
2
(hand arm method)
Trend Machinery & Cutting Tools Ltd.
Managing Director
Stephen Phillips
T3E
To Next Page
Loading...
