TRENDnet TDM-C504 - Back Panel

9
The back panel of the TDM-C504 4-Port ADSL2/2+ Modem Router contains ADSL, Ethernet
Switches, Reset, Power Adapter connection.
ADSL Port for connecting to the ADSL2/2+ Service Provider.
LAN 1-4 10/100Mbps Ethernet Port for connecting to the network devices
Power Power adapter connector.
On/Off Power ON/OFF button.
To “Reset” the TDM-C504 4-Port ADSL2/2+ Modem Router to factory defaults:
 Ensure that the device is powered on.
 Press the Reset button for more than 5 seconds and release. Wait for 30 seconds after release the
Reset button. Do not power off the device during the reset process.
 The default settings are now restored after 30 seconds.
To “Reboot” the TDM-C504 4-Port ADSL2/2+ Modem Router:
 Ensure that the device is powered on.
 Press the Reset button for 2~5 seconds and release. Wait for 30 seconds after release the Reset
button.
Back Panel
RESET Button:
Reboot & Restore the TDM-C504 4-Port ADSL2/2+ Modem Router to
factory defaults.
!