© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-716BRG
8
8. Verify the LAN IP address you would like to apply to the router and select the WAN
type you will be using. Click Next to continue.
9. Select Automatic to have the router automatically detect your 3G WAN settings. Click
Next to continue.
10. Enter the Network ID (SSID) you would like to assign to the router.
11. Select the wireless security settings you would like to apply to the router.
11. Verify your settings and click Apply Settings.
Note: Once the router reboots you will need to connect to the updated settings you
have applied during the wizard (Network ID, Wireless Security, LAN IP).
To Next Page
Loading...
Need help?
General
