© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-716BRG
7
Router Installation
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your 3G dongle.
2. Connect the Mini-USB end of the power adapter to the TEW-716BRG and connect the
power adapter to a power outlet.
3. Connect your 3G dongle to the USB port of the TEW-716BRG.
4. Move the power switch of the TEW-716BRG to the On position and verify that the
LEDs are turned on.
5. Connect your computer wirelessly to the TEW-716BRG. The default SSID (Wireless
Network Name) of the TEW-716BRG is TRENDnet716.
6. Open a web browser and type
http://192.168.10.1 in the address bar and then press
Enter.
7. Enter the System Password and the click Login. By default the System Password is
admin.
8. Select Wizard and click Enter.
6. You will be prompted to change the login password of your router. Complete the
fields and click Next.
7. Select the time zone you would like to set on your router and click Next.
To Next Page
Loading...
Need help?
General
