TEW-736RE
Change the login password
Administrator > Management
It is recommended that the login password is changed. This will help prevent unwanted
users from logging into your device.
1. Log into the management page (
see “How to access your router management page
after the TEW-736RE is linked to a router or access point” on page 9
).
2. Click on Administrator and Management.
3. Under the Administrator Settings section, in the Account field, enter the “admin”. In
the Password field, enter your new password, retype the new password again in
the Password Confirm field to confirm.
4. Click Apply button to apply setting changes.
Change the device name
Administrator > Management
The device name is used to determine all devices in the network. By default the device
name is “TEW-736RE”. This is the name that appears in your network map or DHCP
server client list. You can change the name to help easily distinguish between devices.
1. Log into the management page
(see “How to access your router management
page after the TEW-736RE is linked to a router or access point” on page 9).
2. Click on Administrator and Management.
3. Under the Device Name Settings section, enter the new Device Name.
4. Click Apply button to apply setting changes.
Upgrade firmware
Administrator > Upload Firmware
Updated firmware versions may be made available for download by TRENDnet at
www.trendnet.com/downloads.. These updates are available to resolve issues that may
or may not affect you. It is not entirely recommended to update the firmware if you are
not encountering any issues. Release notes are posted to determine if the updated
firmware resolves issues you are encountering. To verify if new firmware is available,
first reference the firmware number that your device is currently using. In the TEW-
637RE management interface Click on Administrator and then on Status. The firmware
version in use is listed at the top of this page. Cross reference the firmware available at
www.trendnet.com against the firmware your device is using.
Note: The firmware file downloaded from the product webpage is a “.zip” file. The
firmware is a “.bin” file and you will need to extract the zip file first.
1. Download the new firmware from
www.trendnet.com to your computer.
2. Extract the downloaded firmware from its “.zip” file to its native “.bin” file format.
3. Log into the management page (
see “How to access your router management
page after the TEW-736RE is linked to a router or access point” on page 9).
4. Click on Administrator and Upload Firmware.
5. Click Browse and select the firmware file (.bin) in the firmware file downloaded.
6. Click Apply to upload the firmware.
To Next Page
Loading...
Need help?
General
