TEW-736RE
Note:
• The TEW-736RE must be placed in a location where it can establish a wireless
connection to your wireless network. The most ideal locations are areas where
wireless adapters can maintain 2-3 bars with your existing router or a 20-30%
connection rating.
• When conducting a wireless scan you may see the router’s wireless network name
listed twice. This is normal because the TEW-736RE broadcasts the same network
name as your router or access point.
Connect wireless devices to your extended network
You can connect to the extended wireless network the same way you would connect to
any wireless network. When conducting a wireless scan on your wireless device you may
see the same network name displayed twice. This is normal because the TEW-736RE
extends your existing wireless network and repeats the network name of your router or
access point. When choosing a wireless network name, you should always select the
network name with the strongest signal. Once you have configured and saved the
wireless network profile, your wireless device will automatically choose the strongest
signal.
Advance Setup
How to access the management page after the TEW-736RE is
linked to a router or access point
Note: Once the TEW-736RE is connected to your router or access point you will NO
LONGER be able to access the device using the default management page
http://tew-
736re.trendnet or the default IP address ofhttp://192.168.10.100.
To access the TEW-736RE management page while it is connected to a router (or
access point):
1. Access your router’s management interface (see router’s User’s Guide for
instructions).
2. Find the TEW-736RE in your router’s DHCP Client List.
3. Cross reference the MAC address on the DHCP Client List with the MAC address
on the TEW-736RE device label (on the bottom of the Extender).
4. Use the IP address assigned to the TEW-736RE (e.g. if the router has assigned
the TEW-736RE the IP Address of 192.168.1.123, then open a Web browser and
type in
http://192.168.1.123.
5. This will open the TEW-736RE management page.
6. Enter the default User Name and Password of admin in both fields.
a. Note: User name and Password are case sensitive.
To Next Page
Loading...
Need help?
General
