EasyManuals Logo

TRENDnet TEW-738APBO Quick Installation Guide

TRENDnet TEW-738APBO
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
ESPANOL I DEUTSCH FRAN£AiS ENGLISH
The TEW-738APBO will be setup with the following IP address assignment:
TEW-738APBO #1
IP Address: 192.168.10.50
IP Netmask (Subnet Mask): 255.255.255.0
IP Gateway (Gateway IP Address): 192.168.10.1
Primary DNS: 192.168.10.1
TEW-738APBO #2
IP Address: 192.168.10.51
Subnet Mask: 255.255.255.0
Gateway IP Address: 192.168.10.1
Primary DNS: 192.168.10.1
6. Enable WDS mode.
7. Enable WPA2-PSK AES encryption and configure a wireless password for the access point.
8. Enter the MAC address of the other outdoor access point.
9. Repeat the process for the second outdoor access point.
10. Confirm connectivity between the two access points.
Phase 2: WDS Setup
Note:
The initial configuration should be completed in a testing environment with two
TEW-738APBO's approximately 15 ft. (5 meters) apart from one another.
Configure and connect the devices before mounting.
19
©
L
3

Other manuals for TRENDnet TEW-738APBO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEW-738APBO and is the answer not in the manual?

TRENDnet TEW-738APBO Specifications

General IconGeneral
BrandTRENDnet
ModelTEW-738APBO
CategoryWireless Access Point
LanguageEnglish

Related product manuals