EasyManuals Logo

TRENDnet TEW-841APBO User Manual

TRENDnet TEW-841APBO
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-841APBO
7
Quick Reference
TEW-841APBO
Note: By default, the wireless network name/SSID and wireless encryption settings have
been pre-configured for your convenience and can be located on the included preset
wireless sticker. The access point web management configuration page can be accessed
using the URL http://tew-841apbo or using the LAN IP address of the device. The IP
address settings by default is set to DHCP, but if no DHCP server is present on the
network, then it will default to http://192.168.10.100.
Important Note:
Purchasing this model requires the access points to be properly configured to establish
the wireless link/bridged connection to each other and verifying connectivity first before
mounting the access points in their desired locations.
Default Settings
http://tew-841apbo
LAN IP Address: 192.168.10.100 (DHCP)
LAN Subnet Mask: 255.255.255.0
Channel Access Method: CSMA/CA
Mode: Access Point (AP) Mode
WPA2 Encryption Key: <predefined>
User: admin
Password: admin

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEW-841APBO and is the answer not in the manual?

TRENDnet TEW-841APBO Specifications

General IconGeneral
BrandTRENDnet
ModelTEW-841APBO
CategoryWireless Access Point
LanguageEnglish

Related product manuals