© Copyright 2019 TRENDnet. All Rights Reserved.
Primary Product Application
The intended purpose and application for this product is to extend network connectivity
across long physical distances outside of an area or building that lacks local connectivity
using point-to-point or point-to-multipoint wireless bridging using 802.11 standards.
This allows two access points configured in point-to-point bridge capability can
connect/link the two physical locations or buildings together through an encrypted
wireless connection.
Although this product supports multiple wireless modes, the basic installation will only
cover the primary application of point to point wireless connectivity in WDS (Wireless
Distribution System) Mode using AES encryption for security.
Application Diagram
The example application displays two TEW-841PBO access points establishing a wireless link
between each other, both configured in WDS Bridge; allowing for network connectivity between
two buildings over a point-to-point wireless link.
To Next Page
Loading...
Need help?
General
