© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-815DAP
5
Basic Installation
1. Connect the power adapter to the access point and then to a power outlet. Connect
your computer to one of the access point’s LAN port. Push the ON/OFF (EU version)
switch on the TEW-815DAP to power up the access point.
2. Assign a static IP address to your computer’s network adapter in the subnet of
192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. (Please refer to
the
Appendix on page 49 on how to assign static IP address to your computer)
3. Open your web browser and enter
http://tew-815DAP.
Note: You can also access the device using the default IP address (192.168.10.100)
4. Enter the User Name and Password. By default
User Name: admin
Password: admin
5. The Wizard will start. Click Next to begin.
Note: The Wizard should automatically appear. If the wizard does not appear
automatically, then click Wizard.
6. Enter a new password, verify the new password and click Next.
7. Select Access Point Mode and then click Next.
To Next Page
Loading...
Need help?
General
