TRENDnet TK-1602R - Next Lower Channel; Next Higher Channel; Next Lower Bank> (When Daisy-Chained)

TK-802R_TK-1602R Rack Mount KVM Switch User’s Guide July,2004
Page 22
Chapter 3 Operation
OSD
To activate the OSD Menu, hit ScrLk + ScrLk + Space Bar. While the OSD Menu is
active, use the cursor keys to navigate to the channel you want and then hit Enter
or Insert key to select.
In a daisy-chained configuration, you may want to select specific channel on a
specific bank (when you have daisy-chained multiple KVM switch units), just use
the Page up/Page Down key for bank selection and navigate the OSD Menu by
cursors key to the channel you want to select and hit Enter to make it your active
channel.
<Next lower channel>
Front Panel Button
Press the corresponding button.
Hotkeys
Next lower channel =
OSD
Select the corresponding OSD Menu option.
<Next Higher Channel>
Front Panel Button
Press the corresponding button.
Hotkeys
Next higher channel =
OSD
Select the corresponding OSD Menu option.
<Next Lower Bank> (when daisy-chained)
Front Panel Button
Press the corresponding button.
Hotkeys
Previous bank =
OSD
While the OSD is activated on the console screen, press the Page Up key to rotate
through the bank selections decrementally.
Scr
L
k
Scr
L
k
Scr
L
k
Scr
L
k
Scr
L
k
Scr
L
k
Page
Up