TRENDnet TK-1602R - Password Change

TK-802R_TK-1602R Rack Mount KVM Switch User’s Guide July,2004
Page 27
Chapter 3 Operation
enabled by this OSD option. Then next time when you will leave your admin desk, you can then
press reset hotkey sequence: ScrLk + ScrLk + End (or by pressing the last button for over 2
seconds). Then the KVM Switch will go reset and next user will be asked for correct password to
gain access to KVM operation, thus your local console security cannot be compromised anymore
even when you are not present.
<Password Change>
OSD
Navigate with cursor keys downward to the PWD CHANGE option and then hit
Enter key or Insert key to select. A Prompt will appear on screen to request for old
password. Type in the old password and a new prompt will appear to request for
your new password. Type in the new password and press Enter for confirmation.
The password length is up to 8 characters long.
PWD CHANGE
ENTER PASSWORD
- - - - - - - -
ESC QU IT Ent er SELECTESC QUIT Ent er SELECT
ENTER NEW PASSW ORD
- - - - - - - -
ESC QU IT Ent er SELEC TESC QUIT Ent er SELECT
RETYPE NEW PASSWORD
- - - - - - - -
ESC QU IT Ent er SELEC TESC QUIT Ent er SELECT