TRENDnet TWG-BRF114 - Page 7

Introduction
WAN
• 10
• On - Connection to the broadband modem attached to the WAN
(Internet) port is established.
• Off - No connection to the broadband modem on the WAN
(internet) port.
• Flashing - Data is being transmitted or received via the WAN
port.
• 100
• On - Corresponding WAN (hub) port is using 100BaseT.
• Off - No connection to the broadband modem on the WAN (in-
ternet) port.
• Flashing - Data is being transmitted or received via the WAN
port.
• 1000
• On - Corresponding WAN (Internet) port is using 1000BaseT.
• Off - No active connection on the corresponding WAN (Internet)
port.
• Flashing - Data is being transmitted or received via the WAN
port.
5