TRI TOOL INC.
92-0579 Rev. 190612
12
4. Thread the third Cap Screw into the side of the Housing and into the
Saddle half.
5. Tighten all three Cap Screws to retain the Saddle half in the front of the
Housing.
6. Place the second Saddle half in the Housing.
Figure: 4. Install First Saddle Half with Two Clearance Holes
Cap Screw
Cap Screw
Saddle Half
Housing
Feed Handle
HOUSING
FEED HANDLE
SADDLE HALF
FLAT WASHER
SHOULDER SCREW
CLAMP KNOB ASSY
INSERT NUT
INSTALL SECOND SADDLE HALF
Figure: 5. Install Second Saddle Half
To Next Page
Loading...
