FMS-2000M
LIT-12013578
30
Cleaning the display
To clean the display, complete the following steps:
1.
2. Make sure the cloth is only lightly dampened, not wet.
3.
Product code matrix
Feature Code letter or number and description Product code number example:
FMS2M–BT41
Brand Triatek no prefix
Unit FMS = Flow Monitor Station (FMS) FMS
Series 2 = 2000
M = Monitor
2M
Network B
Mounting style T = Thin
S = Surface mount
T
Remote pressure sensors 1 = One remote pressure sensor
2 = Two remote pressure sensors
3 = Three remote pressure sensors
4 = Four remote pressure sensors
4
ISO power supply 0 = No power supply included
2 = 24 VAC to 24 VAC
1
IMPORTANT:
• Do not apply cleaner directly to the touch panel surface. If cleaner spills onto the touch panel, soak up the cleaner immediately
with an absorbent cloth.
• Do not use cleaner that is either acid or alkali. Use neutral pH cleaner.
• Do not use organic chemicals such as: paint thinner, acetone, tolulene, xylene, propyl or isopropyl alchohol, or kerosene.
IMPORTANT :
• N’appliquez pas de nettoyant directement sur la surface du panneau tactile. Si du nettoyant pénètre dans le panneau tactile,
• N’utilisez aucun nettoyant qui est acide ou alcalin. Utilisez un nettoyant dont le pH est neutre.
• N’utilisez pas de produits chimiques organiques comme le diluant pour peinture, l’acétone, le toluène, le xylène, l’alcool
propylique ou isopropylique, ou le kérosène.
To Next Page
Loading...
Need help?
General