38
Switching between TV and SAT
Using the "TV/SAT“ key, you can switch between TV function and
Satellite function.
However. This function must be available on your TV set.
Press the "TV/SAT“ key repeatedly, until the desired function is achieved.
Switching between TV and Radio
Using the key TV/Radio, you can switch between TV function and DVB-Radio
function.
The receiver is now transmitting a radio programme and displaying a background
image.
In order to switch back to the TV programme, press the TV/Radio key on the
remote control unit.
ZOOM
You can enlarge an image section using the zoom function.
Press the ZOOM key twice.
You can select the image section using the keys
CH▼, CH▲, V- and V+.
Every time you press the ZOOM key, the image section will be enlarged in maximum 6
stages. When you press the key for a seventh time, the image returns to its original
size. You can leave this mode using the EXIT key.
LIST
Press the "LIST" key once.
As already described above under the menu item "Programme", you have the
opportunity here to edit the programme list.
Special Function Keys
13
With the receiver you can receive unencrypted digital satellite
programmes (free-to-air) via a satellite dish.
You do not need to programme the receiver for the time being. The most important
broadcasters and satellites are pre-programmed.
The satellite dish must be aligned to the desired satellite.
The receiver searches for additional new programmes as soon as you launch the
automatic transmitter scan for this satellite. Satellites that are not pre-programmed can
be added.
You can easily carry out all receiver settings via the user interface (menu) on the TV
screen.
The multilingual user interface supports the following languages:
German Greek Croatian
Czech Danish Dutch
Hungarian Norwegian Polish
Slovakian Swedish English
French Turkish Spanish
Slovenian Italian Portuguese
Finnish
Description
To Next Page
Loading...
