14
Further Setting Characteristics:
Software update via the RS 232 port on the back of the device
Short switch-over time, fast booting process when switching on
Saving of the last programme viewed (Last Station Memory)
Fully compatible with MPEG-2 and DVB
MPEG-„-Video (MP@ML), MPEG-1 Audio Layer 1, Layer 2
LNB control 13/18V (Tone 0/22 kHz), max. LNB 300mA
Symbol rate 1–35 Mb/s and frequency input 950–2150 MHz
Manual PID input possible
3 operating buttons on the front panel
Plug and Play
Power consumption in standby mode sensationally around 2 watts.
1 favourites list and 8 programme groups
Automatic transmitter scan
Transmitter list editor
Analogue sound output via Phono / AV Cinch plug (stereo), volume control via remote
control possible
AC 3 coaxial output (digital audio, SPDIF)
2 Euro SCART connections, for TV and video recorder (VCR)
CVBS video output signal
Astra1 19E
Türksat 42 E Sirius2 5E
Amos/Atlantic 4-5W
Astra/Eurobird. 28E HispaSat 30W
Eutel W2 16E HellaSat 39E Astra 23.5E
Hotbird 13E
Pre-programmed Satellites:
37
Tools (Symbol: Toolbox)
Sub Menu Description
Factory Reset Password required, All settings are default back to Factory
settings if the receiver is reset.
Note* By pressing and holding the standby button down for 10
seconds the receiver will default back to Factory settings,
all personal settings will be lost.
Software Update Software upgrade is a service function and can only be
done by using the RS232 connector on the back of the
receiver.
Games The receiver has 3 pre-programmed games
Information Displays the latest hardware and software version.
To Next Page
Loading...
