Seite 40 von 72
• TP list
In this menu you can edit the transponder which you have activated in
the sub menu Satellite list .
Edit (red button): Editing the parameters of the selected
transponder. Note that this change has effect on the pro-
grams of the modified transponderder!
New (green button): Add a new transponder which is not yet
saved.
Delete (yellow button): Delete the selected transponder
Search (blue button): Scan the selected transponder for new
programs
Example of program search:
You know that on a certain frequency new programs will be broad-
casted.
Satellite: ASTRA 19,2° Ost - Frequency 10836 MHz
Symbolrate: 22.000 Ks/s - Polarisation: horizontal
Proceed as follows
Submenu TP-List
Press the green function key on your remote control. The
"TP add" opens.
Enter the frequency 10836 with the 0-9 keys on the remote
control.
Enter the symbol rate 22000 with the 0-9 keys on the remote
control.
Set the polarization H for horizontal using V+ and V-.
Save the entries by confirming “save” with OK.
To Next Page
