Seite 39 von 72
Delete all: You can delete all previously made satellites posi-
tions. Not Available when selecting "USALS" in Item rotator
type
Rotator setting: access to the DiSEqC 1.2 control center. In-
dividual satellite positions are stored here.
Limitation: Definition of the turning radius.
• Single satellite search
In this submenu, you can search a complete satellite for (new) pro-
grams.
Satellite: Select the satellite you want to scan.
Only FTA: FTA = Free To Air received programs.
YES = only FTA programs will be displayed
NO = Both free and encrypted programs will be displayed
Channel search: Select if only for TV programs, radio pro-
grams only, or both will be searched.
Network search: Smart search. Available only if the following
is selected "Search Preset".
Search Mode:
Select „Auto Search“: The complete satellite is searched. No
data is required. Select "Search - default": only already cre-
ated transponders are searched.
Search: Press the OK button on the search starts. The pro-
grams found are added to the end of the general satellite list.
• Multi Satellite Search
Here you have the option of all in the sub menu entitled "Satellite List"
active satellites to be searched at once. The setting of the filters de-
scribed in the previous sub-menu item.
To Next Page
