UPM 1400
EN 6
Product cleaning
The housing and the TFT screen should be cleaned with a soft, lint-free cloth. Please do not use solvents such as
thinner, acetone or similar, otherwise the coating, the display or plastic parts might be damaged. Ventilation holes
should be regularly kept clean of dust to ensure proper air circulation.
Introduction
Description of the UPM 1400 unit
The TRIAX UPM 1400 unit is a COMPACT and ECONOMIC measuring device, combining the measurements of
satellite, cable and terrestrial signals. Its compact design and extensive functions make it a reliable aiding tool when
installing and pointing terrestrial and satellite antennas. The 5" colour display provides clear menu navigation. The
most important functions are arranged in the main menu and allow quick access. Important measurement results
can be saved as an image file on an external storage data medium connected via the USB port and thus helps the
creation of a document recording the measurement results
Content of the product package delivered
Please make sure your box contains the items listed below
Main Features
• Measurement of DVB-S/S2, DVB-T/T2 and DVB-C signal levels
• Compatibility with H.265 / HEVC
• Frequency range from 5 MHz to 2150 MHz
• Measure BER et MER in COFDM, QAM and QPSK
• Spectrum analyzer and constellation (vector) diagrams in DVB-S, DVB-T and DVB-C
• USB interface for software updates and for saving measurement data (screen capture)
• 5 "TFT screen with display of LIVE TV programs
• Automatic satellite detection
• Supports Unicable 1 and 2 (SCR/dSCR) standards
To Next Page
Loading...
Need help?
General
