Trimble NAV-900 User Manual

3 | Mounting the NAV-900 Guidance Controller
NAV-900 Guidance Controller Installation Instructions | 25
Fendt internal roof factory mounts
Guidance Ready Fendt (MY 2016 and later) and Challenger 1000 series machines have a cavity within
the roof for GNSS antennas.
For these machines: (Fendt 716 Vario Profi MY2016 shown)
1. Open the roof cavity.
2. Remove the antenna mounting tray. Center the
guidance controller on the tray.
3. Utilize the base mounting plate as a template to
mark and drill
¼" holes for mounting the
guidance controller.

Trimble NAV-900 Specifications

General

Brand	Trimble
Model	NAV-900
Category	Controller
Language	English