If all the modules are not taken out after unpacking, the remaining modules shall be placed
horizontally and repackaged to prevent them from tipping. When packaging, please note that the
glass side of the bottom module should face up, the glass side of the middle modules should face
down, and the glass side of the top module should face up. Stacks of modules should contain no
more than 16 modules, and the frames should be aligned.
If the unpacked modules are not installed immediately, they should be fixed to the stand supporter
with a safety rope under weather of 6 class wind (the modules should be less than 12 pieces).
For matters regarding the unpacking stand supporter, please contact Trina Solar sales.
In windy weather, it is recommended not to carry the modules, and the unpacked modules should
be properly secured.
Do not unpack the modules outside under rain and snow conditions.
Do not carry the module by one person to prevent the module from slipping and hitting other modules,
causing scratches, cracks, or deformation on the modules.
Do not lift modules by their cables or junction box.
Before removing the inner packing belts, please take measures to protect the modules from dumping.
If unpacking the vertical landscape packages on non-horizontal ground, anti-tilting measures should
be taken.
The vertical portrait packages have a high center of gravity and are prohibited to unpack on non-
horizontal or soft grounds to avoid personal injury or even death.
When unpacking vertical portrait package, do not stand on the back of the stand supporter, please
operate in strict accordance with the requirements of the unpacking instructions.
When removing the packing belts in vertical portrait package, take care not to hurt yourself (face,
eyes, etc.).
Do not stand on the pallet during unpacking, please carry the modules from sides of the pallet.
Do not move the stand supporter during unpacking to prevent the modules being tilted.
Do not lean the module on any instable objects, such as poles or mounting columns.
Do not support the back of the modules directly with materials such as wooden strips.
To Next Page
Loading...
