Trina Solar DE21 - Fusing

26
Recommended Wiring Methods
Graphical View
Portrait installation:
Standard short cable length
(Note: One end of the single row needs to be extended)
Portrait installation:
Standard short cable length
(Note: One end of the single row needs to be extended)
Landscape installation:
Standard long cable length or
customized length
6.4.3 FUSING
The correction factor of a fuse shall be determined by an authorized professional electrical engineer
in accordance with the relevant design regulations and system simulation results. Trina Solar does
not responsible for determining the minimum rating of fuse.
The fuse rated current should be chosen depending on different standards, as follows:



 

 

 󰇛󰇜



 

 

 󰇛󰇜
where


Fuse rated current [A]


Short circuit current of the module [A]


Temperature correction factor [-]
(C-type Wiring)
(Linear Wiring)