triOS TpH - Warnings and Precautions; Intended Use and User Requirements

4
D01-068en201913 Manual TpH
General Information // TpH
Use
Use
Calibration
Calibration
Malfunction &
Maintenance
Malfunction &
Maintenance
Commissioning
Commissioning
Introduction
Introduction
General
Information
General
Information
FAQ
FAQ Technical Data
Technical Data
Warranty
Warranty
Customer
Service
Customer
Service
Contact
Contact
Keyword Index
Keyword Index
Accessories
Accessories
1.3 Warnings
• this sensor has been developed for use in industry and science. It should only be used for the measurement of
aqueous solutions, e.g. process waste water, river water or sea water.
• The material resistance should be checked after every use.
• Do not cut, damage or change the cord. Make sure that no heavy objects are placed on the cord and that the cord is
not folded. Make sure that the cord is not run near hot surfaces.
• If the sensor cable is damaged, it must be replaced with an original part by the customer service of TriOS Mess- und
Datentechnik GmbH.
• Stop operation of the sensor in the event of excessive heat development (i.e. if it is hot to the touch).
Switch o the sensor immediately and remove the cable from the power supply. Please contact your dealer
or the TriOS customer service.
• Never try to disassemble or modify a part of the sensor if such a procedure is not explicitly described in this manual.
Inspections, modications and repairs may only be carried out by the dealer or by qualied experts authorized by
TriOS.
Devices from TriOS Mess- und Datentechnik GmbH meet the highest safety standards. Repairs to the device (which involve the
replacement of the connecting cable) must be carried out by TriOS Mess- und Datentechnik GmbH or by a workshop authori-
zed by TriOS. Defective, improper repairs can lead to accidents and injuries.
1.4 Users and Operating Requirements
The TpH sensor has been developed for use in industry and science. The target group for the operation of the TpH sensor is
technically skilled sta in plants, sewage treatment plants, water plants and institutes. The use of this device often requires the
handling of hazardous substances. We assume that operators are familiar with dealing with hazardous substances due to their
professional training and experience. The operating personnel must be able to correctly understand and implement the safety
labels and information on the packaging and in the package inserts of the test kits.
1.5 Intended use
The purpose of the TpH sensor is exclusively to measure pH values in aqueous solutions, as described in this manual. In this
respect, the TpH sensor is an immersion sensor used under water or in conjunction with ow cells. Please note the technical
data of the accessory parts. Any other use is not considered to be in compliance with the intended use.
TriOS does not guarantee the plausibility of the measured values. The user is always responsib-
le for the monitoring and interpretation of the measured values.
DANGER