triOS TpH - Product Introduction; Product Identification

6
D01-068en201913 Manual TpH
Introduction // TpH
Use
Use
Calibration
Calibration
Malfunction &
Maintenance
Malfunction &
Maintenance
Commissioning
Commissioning
Introduction
Introduction
General
Information
General
Information
FAQ
FAQ Technical Data
Technical Data
Warranty
Warranty
Customer
Service
Customer
Service
Contact
Contact
Keyword Index
Keyword Index
Accessories
Accessories
2 Introduction
The TpH is based on the electrochemical measuring method with a measuring electrode and a reference electrode. This intel-
ligent sensor stores calibrations internally. This enables a "plug-and-play" system without recalibration when the location or
measuring transducer is changed.
Built-in encapsulated preamplier for reliability
The encapsulated design protects the sensor's built-in preamplier from moisture and humidity, ensuring reliable sensor ope-
ration. The preamplier produces a strong signal so that the sensor can be located up to 300m away from the controller.
2.1 Product Identication
All TriOS Mess- und Datentechnik GmbH products have a label, which clearly shows the product designation.
There is also a rating plate on the sensor with the following information that you can use to uniquely identify the product:
Serial number
Product type
Power supply
Electric
In addition to the product bar code, the rating plate includes the TriOS Mess- und Datentechnik GmbH logo and
the quality label.
Please note that the specications given here are for illustration purposes only and may deviate depending on the version of
the product.
Assembled
in Europe
Serial No 068XXXXX
Type TpH 2m
Sensor Power
12...24 VDC
Sensor Interface
Modbus RTU
TriOS eCHEM Serie
068XXXXX