Need help?Do you have a question about the Triton CADENCE and is the answer not in the manual?
Provides an overview of the fitting and operating instructions for the mixer shower.
Details installation compliance with regulations and water pressure/temperature specifications.
Specifies minimum and maximum running and static water pressures for the shower.
Advises on fitting a pressure reducing valve for sites with pressure above 5 bar.
Defines the minimum flow rate required for optimal shower performance.
Outlines maximum and minimum hot and cold water temperatures for safe operation.
Explains temperature control and anti-scald protection features.
Covers installation practices, pipework, and connections for the mixer shower.
Provides advice on scale inhibitors and cleaning for hard water conditions.
Lists compatible water systems and boiler types for the mixer shower.
Diagram and explanation for gravity fed systems with cistern and cylinder.
Diagram and explanation for gravity fed systems with a booster pump.
Installation guidelines for combination boilers and modulating gas water heaters.
Guidance for installing with unvented stored hot water cylinders.
Instructions for checking parts and protecting the valve during pipework.
Guidance on positioning the mixer valve and accessories for user comfort.
Details on completing pipework and allowing for valve adjustment.
Instructions for marking pipework routes for rear entry connections.
Information on repositioning the outlet adapter for different pipe connections.
Details on fitting flow regulators for high-pressure systems.
Step-by-step guide for installing flow regulators into the mixer.
Explains the importance of testing anti-scald features for user safety.
Procedure for checking the mixer for leaks after installation.
Steps to ensure correct setup and operation after installation.
Guide to setting the maximum safe temperature limit for the shower.
Lists the standards and regulations the mixer valve complies with.
Graphical representation of pressure versus flow rate for the shower.
Routine procedures for ensuring continued performance and safety.
Recommended methods for cleaning the shower unit to preserve finish.
Instructions for qualified persons on cleaning the inlet filters.
Guidance on disinfection procedures and potential guarantee invalidation.
Procedure for reporting faults, booking service calls, and contact information.
Details of the five-year guarantee, terms, and conditions.
Exclusions from the standard guarantee, including misuse and installation faults.
Information on parts availability and ordering process.
Provides an overview of the fitting and operating instructions for the mixer shower.
Details installation compliance with regulations and water pressure/temperature specifications.
Specifies minimum and maximum running and static water pressures for the shower.
Advises on fitting a pressure reducing valve for sites with pressure above 5 bar.
Defines the minimum flow rate required for optimal shower performance.
Outlines maximum and minimum hot and cold water temperatures for safe operation.
Explains temperature control and anti-scald protection features.
Covers installation practices, pipework, and connections for the mixer shower.
Provides advice on scale inhibitors and cleaning for hard water conditions.
Lists compatible water systems and boiler types for the mixer shower.
Diagram and explanation for gravity fed systems with cistern and cylinder.
Diagram and explanation for gravity fed systems with a booster pump.
Installation guidelines for combination boilers and modulating gas water heaters.
Guidance for installing with unvented stored hot water cylinders.
Instructions for checking parts and protecting the valve during pipework.
Guidance on positioning the mixer valve and accessories for user comfort.
Details on completing pipework and allowing for valve adjustment.
Instructions for marking pipework routes for rear entry connections.
Information on repositioning the outlet adapter for different pipe connections.
Details on fitting flow regulators for high-pressure systems.
Step-by-step guide for installing flow regulators into the mixer.
Explains the importance of testing anti-scald features for user safety.
Procedure for checking the mixer for leaks after installation.
Steps to ensure correct setup and operation after installation.
Guide to setting the maximum safe temperature limit for the shower.
Lists the standards and regulations the mixer valve complies with.
Graphical representation of pressure versus flow rate for the shower.
Routine procedures for ensuring continued performance and safety.
Recommended methods for cleaning the shower unit to preserve finish.
Instructions for qualified persons on cleaning the inlet filters.
Guidance on disinfection procedures and potential guarantee invalidation.
Procedure for reporting faults, booking service calls, and contact information.
Details of the five-year guarantee, terms, and conditions.
Exclusions from the standard guarantee, including misuse and installation faults.
Information on parts availability and ordering process.
General| Mounting | Wall Mounted |
|---|---|
| Handle Style | Lever |
| Finish | Chrome |
| Thermostatic Control | Yes |
| Installation | Professional Installation Recommended |
| Warranty | 5 Years |
To Next Page
