Default Shower Rate
Default Shower Flow setting
This will set the showering ow from any of your
shower outlets when default showering is activated.
This can be set as ‘OFF’ or between 1 and 10.
If set as ‘O’ the shower will start at the last used
ow setting. Using the temperature dial, select your
ow setting. Save the setting using the accept but-
ton ( ). Default factory setting is ‘10’.
Default Outlet
This specifies the
default outlet for this
cont
ro
l panel
1
Default Outlet setting*
This will set which outlet is used when default
showering is activated The default outlet can be set
to either outlet 1 or outlet 2. Using the temperature
dial, select your outlet. Save the setting using the
accept button ( ). Default factory setting is ‘1’.
*Only available on multi outlet product versions
Outlet Icons
This setting enables you to choose the outlet icon
that represents your outlet type. Using the
temperature dial, select the outlet, use the accept
button ( ) to conrm outlet. Using the
temperature dial again, select the appropriate icon,
use the accept button ( ) to conrm icon and
return button ( ) to return to congure menu.
See display screen icons on page 6 for icon options.
1
Outlet Icon
Choose which outle
t
to change the icon
To Next Page
Loading...
Need help?
General
