What does 'Check waste toner box' mean on my Triumph Adler LP 4035 Printer?
If your Triumph Adler printer displays the message 'Check waste toner box', it warns that either the waste toner box is not installed or is full. Install a new waste toner box to resolve this.
What to do if my Triumph Adler LP 4035 Printer prints a status page but not computer jobs?
If your Triumph Adler Printer prints a status page but not jobs from your computer, make sure the printer cable or interface cable is securely connected at both ends. Try replacing the printer cable or the interface cable. Also, the issue might be with specific program files or application software. Try printing a different file or using another print command to see if the problem persists. If it only happens with a specific file or application, review the printer driver settings for that application.
Why is my Triumph Adler LP 4035 Printer printing completely blank pages?
If your Triumph Adler printer is producing completely blank printouts, first check the toner container. Open the top cover and make sure the toner container is correctly installed in the printer.
What does 'Add paper MPTray' mean on my Triumph Adler LP 4035 Printer?
If your Triumph Adler printer displays the message 'Add paper MPTray', it means the paper has run out in the displayed paper source. Supply paper according to the paper source displayed to resolve this issue.
How to clear a paper jam on Triumph Adler LP 4035?
If your Triumph Adler printer is showing 'Paper jam ###############', remove the jammed paper. The printer should automatically restart printing after you clear the jam.
What does 'Replace toner Clean printer' mean on my Triumph Adler Printer?
If your Triumph Adler printer is showing 'Replace toner Clean printer', it means the toner has run out in the toner container. Replace the toner container using a new toner kit.
What does 'e-MPS not stored Press GO' mean on my Triumph Adler LP 4035 Printer?
If your Triumph Adler printer displays 'e-MPS not stored Press GO', it means the e-MPS job couldn't be stored because the RAM disk is disabled, has insufficient space, the Microdrive isn't installed, or it's full. Press [GO] to print an error report.
What does 'File not found Press GO' mean on my Triumph Adler LP 4035?
If your Triumph Adler printer displays 'File not found Press GO', it means you've tried to print a job not in the specified virtual mailbox, or the mailbox isn't found. If Auto Error Clear is on, printing will resume automatically after a set time.
What does 'Call service ####:0123456' mean on my Triumph Adler LP 4035 Printer?
If your Triumph Adler printer displays 'Call service ####:0123456', this indicates a mechanical error. You will need to call for service.
How to fix a grey background when printing with my Triumph Adler LP 4035 Printer?
If you are seeing a grey background on your Triumph Adler prints, check the operation panel for a 'Toner low' message and a flashing Attention indicator. If these are present, install a new toner kit. You can also adjust the print density via the operation panel, selecting a lighter density setting.
General| Print Technology | Laser |
|---|---|
| Print Speed (A4) | 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Multi-Purpose Tray Capacity | 100 sheets |
| Standard Output Capacity | 250 sheets |
| Maximum Output Capacity | 500 sheets |
| Connectivity | USB 2.0, Ethernet |
| Weight | 15.5 kg |
| Internal Memory | 256 MB |
| Processor Frequency | 667 MHz |
| Duplex Printing | Yes |
| Standard Printer Languages | PCL 5e, PCL 6, PostScript 3 |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Maximum Input Capacity | 2, 600 sheets |
Guidelines for selecting and using paper for optimal printer performance and longevity.
Guidance on choosing paper based on condition, composition, and size for best results.
Details on supported paper types, weights, and their compatibility with printer sources.
Step-by-step instructions for loading paper into the cassette and MP tray.
General information on the printer's control panel and its configuration capabilities.
Guide to using the menu selection system for printer setup and customization.
How to print and interpret status pages for printer diagnostics and configuration.
Exploring e-MPS features such as Job Retention, Quick Copy, and Private Print.
Steps for changing communication parameters for parallel, serial, and network interfaces.
Setting default emulation, fonts, print quality, and paper handling preferences.
Operations for CompactFlash, Microdrive, USB memory, and RAM disk management.
Configuration of MP tray modes, paper size, type, and selecting default paper sources.
Overview of available optional hardware for printer expansion and enhancement.
Instructions for installing and removing memory modules to enhance printer performance.
Description of Microdrive/CompactFlash card functionality, installation, and e-MPS integration.
Details on installing and connecting the UT-110 Network Interface Card for network connectivity.
Explanation of parallel, USB, and serial interface signals, timings, and connector specifications.
Details on parallel interface modes, IEEE 1284 compliance, and pin assignments for data transfer.
Information on USB interface connectors, cable requirements, transfer modes, and pin assignments.
Explanation of serial interface signals, RS-232C protocol parameters, and voltage levels.
Steps for connecting the printer via RS-232C cable and configuring PC communication settings.
To Next Page
