Why does my Triumph Adler Printer display 'Account error ## Press GO'?
The message 'Account error ## Press GO' on your Triumph Adler Printer indicates that the Job Accounting function is enabled, and an attempt to specify job accounting settings or to register or delete an account has failed. Press the [GO] button to return the printer to the print-ready status.
What to do if the Triumph Adler Printer says 'Add paper MPTray'?
If your Triumph Adler Printer displays the message 'Add paper MPTray', it means that the paper has run out in the paper source displayed. You should supply paper to the indicated paper source, which could be the paper cassettes, MP tray, or optional paper feeders. This message alternates with printer status messages like 'Ready', 'Please wait', and 'Processing'.
What to do if my Triumph Adler Printer displays 'Close top cover'?
If your Triumph Adler Printer shows the message 'Close top cover', it indicates that the top cover of the printer is open. Simply close the printer's top cover to resolve the issue.
What to do if my Triumph Adler Printer displays 'Close left cover'?
If your Triumph Adler Printer displays the message 'Close left cover', it means that the left cover of the printer is open. Close the printer's left cover to continue.
What to do if my Triumph Adler Printer displays 'Close rear unit'?
If your Triumph Adler Printer displays the message 'Close rear unit', it indicates that the rear unit of the printer is open. Ensure that you close the printer's rear unit.
Why is my Triumph Adler Printer printing faint or blurred?
Faint or blurred printing on your Triumph Adler Printer can be due to several reasons. First, check the EcoPrint settings on the operation panel and ensure it is switched off. Also, verify that the paper type setting is correct for the paper you are using. Finally, check the toner level; if the Toner low message is displayed, install a new toner kit.
Why is my Triumph Adler Printer emitting vapor?
Vapor emitted from the rear of your Triumph Adler Printer is due to heat generated during printing evaporating water moisture in the printed paper. To correct this, increase the temperature in the room and use paper that has been stored in a dry place.
What does 'KPDL error ## Press GO' mean on my Triumph Adler Printer?
The message 'KPDL error ## Press GO' on your Triumph Adler Printer indicates that the current print processing cannot continue due to a KPDL error. To print an error report, display >>Error Report from the menu system, and select On. Press [GO] to resume printing.
Why is my Triumph Adler Printer showing a gray background on prints?
A gray background on your Triumph Adler Printer's output may be caused by a low toner level or an incorrect print density setting. Check the operation panel for the Toner low message and a flashing [Attention] indicator; if present, install a new toner kit. Also, access the print menu from the operation panel and select a lighter density setting.
What does 'Load MP Tray (A4)/(PLAIN)' mean on my Triumph Adler Printer?
If your Triumph Adler Printer displays 'Load MP Tray (A4)/(PLAIN)', it means there is no paper cassette installed in the printer that matches the paper size and paper type of the print job. Set paper in the MP tray and press [GO] to resume printing.
General| Print Speed | 35 ppm |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB 2.0, Ethernet |
| Standard output capacity | 150 sheets |
| Maximum output capacity | 150 sheets |
| Type | Laser Printer |
Identifies and describes external parts on the printer's front panel.
Details and labels the connectors and components located on the printer's rear.
Explains the function of the printer's control panel, including buttons and display.
Provides essential instructions for proper paper selection and usage to prevent issues.
Offers guidelines on choosing suitable paper types, sizes, and conditions for optimal printing.
Lists and describes various paper types supported by the printer and their settings.
Step-by-step guide for correctly inserting paper into the printer's main paper cassette.
Instructions for loading paper, transparencies, and labels into the versatile multi-purpose tray.
Specific procedures for successfully loading and printing envelopes using the MP tray.
Explains how to connect the printer to a computer using USB, Network, or Parallel interfaces.
Details how to configure network settings like TCP/IP, IPv6, and other protocols.
Guides users through the process of installing the printer driver on Windows and Mac operating systems.
Describes how to access and use the Status Monitor utility for checking printer status and settings.
Provides instructions for replacing the toner container and waste toner box for optimal printer performance.
Outlines the procedures for cleaning the printer's internal components to maintain print quality.
Offers basic solutions to common printer problems and provides troubleshooting tips.
Explains how to diagnose and fix issues related to print quality, such as streaks or blank pages.
Lists common error messages displayed by the printer and their corresponding corrective actions.
Detailed instructions and diagrams for safely removing jammed paper from various printer locations.
Introduces the printer's control panel layout, including indicators, message display, and keys.
Explains how to navigate and use the printer's menu system for configuration and settings.
Covers how to set paper size and type for different paper sources like MP tray and cassettes.
Details how to adjust various printing parameters such as paper source, quality, and orientation.
Guides users through configuring TCP/IP, IPv6, and other network-related settings for connectivity.
Explains how to set up security features like administrator ID, password, and interface blocking.
Describes how to enable and configure job accounting for managing print usage by department.
Covers setting and changing administrator credentials for accessing printer functions.
Details printer maintenance tasks and adjustments like restarting the printer or service functions.
Explains how to install optional memory modules to enhance printer performance and capabilities.
Describes the PF-310 paper feeder, its capacity, and how it extends printing capabilities.
Details the use and installation of CompactFlash cards for storing fonts, macros, and overlays.
Lists additional optional hardware accessories for the printer, such as feeders and hard disks.
Provides specifications and pin assignments for connecting the printer via USB.
Lists supported network protocols, operating systems, and features for network connectivity.
Lists detailed technical specifications for different printer models, including performance and dimensions.
Outlines the environmental standards and features the printer complies with.
Defines key terms and technical jargon used throughout the printer manual.
To Next Page
