How to remove dirt from paper in Triumph Adler Printer?
If your Triumph Adler Printer is leaving dirt on the top edge or back of the paper, if the problem is not solved even after printing several pages, clean the registration roller. If the problem is not solved after cleaning, call for service representative.
Why is my Triumph Adler P-3521DN Printer printing completely blank pages?
Check the toner container of your Triumph Adler Printer. Open the front cover and make sure that the toner container is correctly installed in the printer. Refer to Toner Container Replacement on page 4-2.
What to do when Triumph Adler P-3521DN Printer says 'Replace toner'?
When the message 'Replace toner' appears on your Triumph Adler Printer, it means that the toner has run out in the toner container. Replace the toner container using a new toner kit.
What does 'Call service F###' mean on Triumph Adler P-3521DN?
If your Triumph Adler Printer displays 'Call service F###', where F### represents a controller error, call for a service representative. The printer does not operate when this message is displayed.
What does 'KPDL error' mean on Triumph Adler P-3521DN Printer?
If your Triumph Adler Printer displays 'KPDL error ## Press GO', the current print processing cannot continue because of occurrence of KPDL error which is categorized by ##. To print out an error report, display >>Error Report from the menu system, and select On. Press [GO] to resume printing.
What does 'Duplex disabled Press GO' mean on Triumph Adler Printer?
If your Triumph Adler Printer displays 'Duplex disabled Press GO', you attempted to print with a paper size and paper type that cannot be used for duplex printing. Press [GO] to print onto one side of the paper only. You can select an alternative paper size and type by pressing the ? or ?. You can also press [MENU] and change the tray setting inside the menu, which will automatically cancel the error and output resumes.
What does 'Install MK' mean on Triumph Adler P-3521DN Printer?
If your Triumph Adler Printer displays 'Install MK', replace the Maintenance Kit which is displayed on the message display. Replacement of the maintenance kit is necessary at every 100,000 pages of printing and requires professional servicing. Contact your service technician.
What to do if Triumph Adler P-3521DN prints a full single-color page?
Contact your service representative.
Why is my Triumph Adler Printer printing incomplete or out of position?
If your Triumph Adler Printer is printing incomplete or out-of-position documents, verify that the printing settings are correct in both the application software and the printer driver. Also, check for PRESCRIBE command errors, especially if the issue occurs with a specific file or program, indicating a possible error in a command parameter or syntax.
How to resolve dropouts and stray dots on Triumph Adler P-3521DN Printer?
If your Triumph Adler Printer is experiencing dropouts or stray dots, it could be due to a damaged drum or developer unit. If the problem persists after printing several pages, contact your service representative.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Connectivity | USB 2.0, Ethernet |
| Warm-up Time | 15 seconds |
| Multi-purpose Tray Capacity | 50 sheets |
| Processor Frequency | 800 MHz |
| Operating Systems Compatibility | Windows, Linux, macOS |
| Maximum Input Capacity | 800 sheets |
| Standard Output Capacity | 150 sheets |
| Maximum Output Capacity | 150 sheets |
| Paper Tray Media Types | Plain paper |
| Multi-purpose Tray Media Types | Plain paper, Envelopes, Labels |
To Next Page
