What does it mean if pressing the Start key on my Triumph Adler All in One Printer does not produce copies?
If pressing the Start key on your Triumph Adler All in One Printer does not produce copies, the machine may be in Sleep mode. Press any key on the operation panel to recover the machine from Sleep mode. The machine will be ready to copy within 15 seconds.
What to do if my Triumph Adler P-3525 MFP paper often jams?
If your Triumph Adler All in One Printer paper often jams, make sure you load the paper correctly. Also, if the paper is of the supported type but is in poor condition, remove the paper, turn it over, and reload it. Replace the paper with new paper if it is curled, folded, or wrinkled. Finally, remove any jammed paper from the machine.
What to do if my Triumph Adler P-3525 MFP All in One Printer cannot print?
If your Triumph Adler All in One Printer cannot print, ensure that the power cord is plugged into an AC outlet and the power switch is turned on. Check that the printer cable is securely connected and that the machine was powered on after connecting the printer cable. If the print job is paused, press [Resume] (the Left Select key) to resume printing. If there is an error message displayed, follow the corresponding procedure.
What does it mean when my Triumph Adler P-3525 MFP displays 'USB memory error. Job is canceled.'?
If your Triumph Adler All in One Printer displays 'USB memory error. Job is canceled.', this job is canceled. Press the OK key.
Why is an image size shrunk vertically or horizontally when displaying an image sent from my Triumph Adler P-3525 MFP on the PC?
When displaying an image sent from your Triumph Adler All in One Printer on the PC, an image size is shrunk vertically or horizontally because you have selected 200×100dpi Normal or 200×400dpi Super Fine for the scan resolution. Select a scan resolution other than 200 × 100dpi Normal or 200 × 400dpi Super Fine when sending an image.
What does it mean when my Triumph Adler P-3525 MFP displays 'Polling box limit exceeded. Job is canceled.'?
If your Triumph Adler All in One Printer displays 'Polling box limit exceeded. Job is canceled.', the job is canceled. Press the OK key.
What does it mean when my Triumph Adler P-3525 MFP says 'Check cassette 1'?
If your Triumph Adler All in One Printer displays 'Check cassette 1', a paper lift error has occurred in the paper source's cassette. Pull out the cassette for the paper source displayed (either the paper cassettes or optional paper feeders) and check if the paper is loaded correctly.
What does it mean when my Triumph Adler P-3525 MFP says 'Close front cover'?
If your Triumph Adler All in One Printer displays 'Close front cover', there is a cover that is open. Close the cover indicated on the operation panel.
What to do if a paper jam occurs on my Triumph Adler P-3525 MFP All in One Printer?
If a paper jam occurs on your Triumph Adler All in One Printer, a message will be displayed about the jam and copying or printing will stop. Leave the power switch on and to remove the jammed paper refer to the following information below.
What to do if my Triumph Adler P-3525 MFP All in One Printer printouts are wrinkled or curled?
If printouts from your Triumph Adler All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
General| Brand | Triumph Adler |
|---|---|
| Model | P-3525 MFP |
| Category | All in One Printer |
| Language | English |
Details the machine's operation panel keys and functions for navigation and control.
Identifies the main parts and external components of the machine.
Details the components and parts of the document processor unit.
Guides on selecting connection methods and preparing necessary cables.
Basic steps for initial machine setup, including power, language, and date/time.
Steps for network connectivity, software installation, and web server access.
Procedures for loading paper into cassettes/trays and placing originals for scanning.
How to log in to the machine using credentials and log out.
Step-by-step instructions for performing basic copying operations.
Instructions for printing documents from computer applications.
Procedures for sending scanned documents via E-mail, PC, or FTP.
Specifies the size of originals for scanning before starting the copying process.
Selects the paper source that contains the required paper size.
Allows combining 2 or 4 originals onto a single page for copying.
Function to save toner by reducing print quality for non-critical copies.
Selects the original size for scanning before starting the sending process.
Selects the size of the image to be sent.
Scans originals by automatically zooming depending on the sending size.
Selects the type and binding of original for duplex sending.
Prints files stored in USB memory directly without using a computer.
Stores scanned image files in USB memory connected to the machine.
Procedure to safely remove USB memory to avoid data damage.
Prints data stored on the machine's RAM disk from the operation panel.
Checks the status of jobs being processed or waiting to be printed.
Checks the history of completed jobs.
Pauses and resumes printing or waiting jobs.
How to cancel any print or send job that is currently being executed.
Includes settings for display, sound, date/time, and function defaults.
Settings for printer emulation, EcoPrint, and orientation.
Options for sending functions like key set and destination check.
Settings for Job Box features such as Quick Copy Jobs and retention.
Instructions for cleaning the machine's glass platen and document processor.
Procedure for replacing the toner container when it is empty.
General guidelines for identifying and resolving common machine problems.
How to interpret and respond to error messages displayed on the control panel.
Step-by-step instructions for clearing paper jams in various locations.
Specifies how user access is administered and enables/disables user login.
Manages copy/print counts by assigning IDs to accounts.
Checks the number of pages printed and scanned by various criteria.
To Next Page