What does it mean when my Triumph Adler P-3525 MFP says 'Add toner'?
If your Triumph Adler All in One Printer displays the message 'Add toner' and the attention LED is lit, replace the toner container.
What does it mean if pressing the Start key on my Triumph Adler All in One Printer does not produce copies?
If pressing the Start key on your Triumph Adler All in One Printer does not produce copies, the machine may be in Sleep mode. Press any key on the operation panel to recover the machine from Sleep mode. The machine will be ready to copy within 15 seconds.
What to do if my Triumph Adler P-3525 MFP All in One Printer printouts are wrinkled or curled?
If printouts from your Triumph Adler All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
What to do if my Triumph Adler All in One Printer cannot print with USB memory?
If your Triumph Adler All in One Printer cannot print with USB memory, the USB host may be blocked. Select Unblock in the USB host settings.
What to do if part of the image from my Triumph Adler P-3525 MFP is periodically faint or shows white lines?
If part of the image from your Triumph Adler All in One Printer is periodically faint or shows white lines, the developer unit may not be attached correctly. Attach the developer unit correctly.
What does it mean when my Triumph Adler P-3525 MFP displays 'Polling box limit exceeded. Job is canceled.'?
If your Triumph Adler All in One Printer displays 'Polling box limit exceeded. Job is canceled.', the job is canceled. Press the OK key.
What does it mean when my Triumph Adler P-3525 MFP displays 'USB memory error. Job is canceled.'?
If your Triumph Adler All in One Printer displays 'USB memory error. Job is canceled.', this job is canceled. Press the OK key.
Why are blank sheets ejected from my Triumph Adler P-3525 MFP?
If blank sheets are ejected from your Triumph Adler All in One Printer, it may be because the originals are not loaded correctly. When placing originals on the platen, place them face-down and align them with the slit glass. When placing originals in the document processor, place them face-up.
Why are my Triumph Adler P-3525 MFP All in One Printer printouts too dark?
If your Triumph Adler All in One Printer printouts are too dark, it could be because the machine is in Auto Density mode (set the correct density level for auto density) or the machine is in Manual Density mode (select the correct density level).
What to do if my Triumph Adler P-3525 MFP All in One Printer cannot print?
If your Triumph Adler All in One Printer cannot print, ensure that the power cord is plugged into an AC outlet and the power switch is turned on. Check that the printer cable is securely connected and that the machine was powered on after connecting the printer cable. If the print job is paused, press [Resume] (the Left Select key) to resume printing. If there is an error message displayed, follow the corresponding procedure.
General| Brand | Triumph Adler |
|---|---|
| Model | P-3525 MFP |
| Category | All in One Printer |
| Language | English |
Details the machine's operation panel keys and functions for navigation and control.
Identifies the main parts and external components of the machine.
Details the components and parts of the document processor unit.
Guides on selecting connection methods and preparing necessary cables.
Basic steps for initial machine setup, including power, language, and date/time.
Steps for network connectivity, software installation, and web server access.
Procedures for loading paper into cassettes/trays and placing originals for scanning.
How to log in to the machine using credentials and log out.
Step-by-step instructions for performing basic copying operations.
Instructions for printing documents from computer applications.
Procedures for sending scanned documents via E-mail, PC, or FTP.
Specifies the size of originals for scanning before starting the copying process.
Selects the paper source that contains the required paper size.
Allows combining 2 or 4 originals onto a single page for copying.
Function to save toner by reducing print quality for non-critical copies.
Selects the original size for scanning before starting the sending process.
Selects the size of the image to be sent.
Scans originals by automatically zooming depending on the sending size.
Selects the type and binding of original for duplex sending.
Prints files stored in USB memory directly without using a computer.
Stores scanned image files in USB memory connected to the machine.
Procedure to safely remove USB memory to avoid data damage.
Prints data stored on the machine's RAM disk from the operation panel.
Checks the status of jobs being processed or waiting to be printed.
Checks the history of completed jobs.
Pauses and resumes printing or waiting jobs.
How to cancel any print or send job that is currently being executed.
Includes settings for display, sound, date/time, and function defaults.
Settings for printer emulation, EcoPrint, and orientation.
Options for sending functions like key set and destination check.
Settings for Job Box features such as Quick Copy Jobs and retention.
Instructions for cleaning the machine's glass platen and document processor.
Procedure for replacing the toner container when it is empty.
General guidelines for identifying and resolving common machine problems.
How to interpret and respond to error messages displayed on the control panel.
Step-by-step instructions for clearing paper jams in various locations.
Specifies how user access is administered and enables/disables user login.
Manages copy/print counts by assigning IDs to accounts.
Checks the number of pages printed and scanned by various criteria.
To Next Page