972
Perform the following operations:
• Rear Suspension Unit - Installation
• Catalytic Converter - Installation
• Battery - Installation
• Seat - Installation
Swinging Arm – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
If the engine has recently been running, the exhaust components may be hot to the
touch. Contact with the hot components may cause damage to exposed skin. To avoid
skin damage, always allow the hot parts to cool before working on the exhaust system.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Rear Wheel - Removal
• Catalytic Converter - Removal
• Starter Motor - Removal
• Rear Suspension Unit - Removal
• Rear Suspension Linkage - Removal
• Rear Bevel Box - Removal with the final drive shaft
To Next Page