GENERAL INFORMATION
110
The tire pressures shown on the
instrument panel indicate the actual
tire pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tires
are cold because tires become warmer
during riding, causing the air in the tire
to expand and the pressure to increase.
The cold inflation pressures specified by
Triumph take account of this.
Only adjust tire pressures when the
tires are cold using an accurate tire
pressure gage (see page 175), and do
not use the tire pressure display on the
instruments.
Replacement Tires
When replacing tyres, always have an
authorized Triumph dealer fit your tyres
and make sure they are aware that
tyre pressure sensors are fitted to the
wheels.
Sensor Batteries
When the battery voltage in a pressure
sensor is low, a message will be shown
in the instrument display and the
TPMS symbol or message will indicate
which wheel sensor has the low battery
voltage. If the batteries are completely
flat, only dashes will be shown in the
instrument display, the red TPMS
warning light will be on and the TPMS
symbol will flash continuously. Contact
your authorized Triumph dealer to have
the sensor replaced and the new serial
number recorded in the spaces provided
on page 109.
With the ignition switch turned to the
ON position, if the TPMS symbol flashes
continuously or the TPMS warning light
remains on there is a fault with the
TPMS system. Contact your authorized
Triumph dealer to have the fault
rectified.
To Next Page
Loading...
Need help?
General
